Material
Recyclable
Buy direct
Cycle Lane Defender with City Post
Rosehill rubber cycle lane defender and TMP City Post deliver permanent or temporary cycle lane segregation. They provide excellent safety for cyclists as they provide continuous or light segregation by excluding other traffic from the cycle lane - a choice of 3 sections, with or without a City Post.
Evo-Max Traffic Bollard
Chevron Left – Car Park Sign Bollard
The TMP car park sign 'Chevron Left' is ideal for directing traffic flow , and warning of tight corners. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
City Post Orange Traffic Separator – Bolt down
This TMP City Post traffic separator, is perfect for areas with high volumes of traffic, rebounding back to an upright position.  It has been tested vigorously having endured 100 impacts at 100 kmh and still standing.
- Traditional bolt down design
- Made of flexible polyurethane
- Remaining flexible at very high and low temperatures (-28°C to +75 °C)
- TSRGD compliant
- UV resistant
- 1 year limited warranty
- 360° visibility
Traffic Separator FG300 Post – White
Wrench for TMP City Post
City Post Traffic Separator – Black
This TMP City Post traffic separator, is perfect for areas with high volumes of traffic, rebounding back to an upright position.  It has been tested vigorously having endured 100 impacts at 100 kmh and still standing.
- Made of flexible polyurethane
- Remaining flexible at very high and low temperatures (-28°C to +75 °C)
- TSRGD compliant
- UV resistant
- 1 year limited warranty
- 360° visibility
Orion 20 Bollard
Pictor Minor Steel-Core Bollard
The TMP Pictor Minor Steel-Core bollard has been designed and tested to protect pedestrians and assets. The Pictor Minor bollard features a smaller sign face, ideal for use on shared cycle/ pedestrian routes.
- For perimeter protection, the Pictor Minor bollard has an anti-ram inner steel tube.
- Our bollards are built to last.
Speed Bump Section – Black
NonCrete Bio-Polymer Bollard
The award-winning NonCrete bio-polymer bollard is the perfect replacement for traditional concrete bollards. It’s easier to install and maintain, and better for the environment.
- Bio-polymer that looks like concrete
- Takes 4-5 minutes to maintain/ replace, minimising risk to operatives
- Just 3.5kg vs 80kg for a traditional concrete bollard
- 10.6 CO2e per NonCrete bollard compared to c.640 CO2e per traditional concrete bollard
- No manual handling issues
- Fully recyclable
We also offer alternative reflective banding colours.
2.4m Speed Bump – Ready To Install
The 2.4m Speed bump is made up of 4 middle sections plus two end caps. These bumps are ideal for calming traffic especially around vulnerable road users such as near schools.
- Overall length is 2440mm with end caps, 50mm high.
- Made from a tough recycled thermoplastic material.
- Bolt down holes for 12mm bolts.
- A chequered pattern for extra grip.
- Fixings included.
TMP Locksafe Socket Plug Plate
The TMP Locksafe socket plug plate has been made to perfectly fit into the Locksafe socket to seal the hole when there isn't a bollard inserted into it. This plug is important to keep the socket clean and stop anyone tripping in the hole when it is empty.
- Manufactured from steel with a protective zinc coating.
- Easy to fit and take out when required.
Manchester Steel-Core Bollard
Pegasus Sign Bollard
The Pegasus bollard is the ultimate sign carrying bollard for rectangular sign faces. With 305mm x 255mm signage capacity either side, the Pegasus is perfect for displaying disabled badge holder signs (661A) or enforcing other parking restrictions.
Use our Bollard Builder below to customise your bollard.
3.4m Speed Bump – Ready to Install
The 3.4m Speed bump is made up of 6 middle sections plus two end caps. These bumps are ideal for calming traffic especially around vulnerable road users such as near schools.
- Overall length is 3440mm with end caps, 50mm high.
- Made from a tough recycled thermoplastic material.
- Bolt down holes for 12mm bolts.
- A chequered pattern for extra grip.
- Fixings included.
Speed Bump End Caps (pair)
The speed bump end caps come in pairs and are fixed to the ends of the speed bump sections to leave a smooth finish to the speedbump.
These speed bumps are ideal for placing near areas that drivers need to reduce speed and take care.
- Made from a tough recycled thermoplastic
- Bolt down holes for easy installation
- A chequered pattern for extra grip
Munro Bollard
Bollard Conversion Plate
Our bollards can also be retrofitted to replace traditional base lit bollards, by using the Universal Conversion Plate, which allows easy installation without the need to excavate or remove the existing light box. The plates are manufactured from stainless steel and powder coated in matt black.
*Haldo variant available.
Corduroy Tactile Paving (10 tiles per box)
The Tactile Corduroy paving is very important to pedestrians negotiating our footpaths. The profile differs from the Blister profile to convey a different message: ‘hazard, proceed with caution’.
The Corduroy highlights the presence of specific hazards such as steps, level crossings or the approach to on-street rapid transit platforms (LRT). Comprising of rows of 6mm high rounded bars running transversely across the direction of the pedestrians travel.
EcoLight – Sign Light
Delivering industry-leading power efficiency, the EcoLight will illuminate traffic signs up to 1200mm and help you reduce carbon emissions on your network.
- Made from recycled material.
- Lightweight one-piece IP66 sealed sign light.
- Power consumption of only 2.6 watts
- 10 year warranty
Speed Bump Section – Yellow
City Post Hazard Marker
This TMP Verge Marker, is perfect for highlighting roadside verges and rebounding back to an upright position if hit.  It has been tested vigorously having endured 100 impacts at 100 kmh and still standing.
- Made of flexible polyurethane
- Remaining flexible at very high and low temperatures (-28°C to +75 °C)
- TSRGD compliant
- UV resistant
- 1 year limited warranty
- 360° visibility
No Entry – Car Park Sign Bollard
The TMP car park sign 'No Entry' is ideal for directing traffic into the correct path of flow, making it clear not to enter certain areas. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
