Material
Recyclable
The Pegasus bollard is the ultimate sign carrying bollard for rectangular sign faces. With 305mm x 255mm signage capacity either side, the Pegasus is perfect for displaying disabled badge holder signs (661A) or enforcing other parking restrictions.
Use our Bollard Builder below to customise your bollard.
The 3.4m Speed bump is made up of 6 middle sections plus two end caps. These bumps are ideal for calming traffic especially around vulnerable road users such as near schools.
The speed bump end caps come in pairs and are fixed to the ends of the speed bump sections to leave a smooth finish to the speedbump.
These speed bumps are ideal for placing near areas that drivers need to reduce speed and take care.
The modern looking Munro bollard has been designed to be robust and elegant. The Munro is ideal for marking junctions and for reinforcing traffic calming schemes.
Our bollards can also be retrofitted to replace traditional base lit bollards, by using the Universal Conversion Plate, which allows easy installation without the need to excavate or remove the existing light box. The plates are manufactured from stainless steel and powder coated in matt black.
The Tactile Corduroy paving is very important to pedestrians negotiating our footpaths. The profile differs from the Blister profile to convey a different message: ‘hazard, proceed with caution’.
The Corduroy highlights the presence of specific hazards such as steps, level crossings or the approach to on-street rapid transit platforms (LRT). Comprising of rows of 6mm high rounded bars running transversely across the direction of the pedestrians travel.
Pack of 10 tiles per box
Note: The exact colour/tone may vary batch to batch.
The Churchill bollard is a plastic blow moulded verge maker. Easy to install and hard wearing, the Churchill post has a cylindrical design with hi vis reflective area conforming to RI EN12899-1 class R2 reflectors.
Delivering industry-leading power efficiency, the EcoLight will illuminate traffic signs up to 1200mm and help you reduce carbon emissions on your network.
Sign column/post, sign or jubilee clips not included.
This is a 500mm wide x 50mm high speed bump section in yellow. These bumps are ideal for calming traffic especially around vulnerable road users such as near schools.
This TMP Verge Marker, is perfect for highlighting roadside verges and rebounding back to an upright position if hit.  It has been tested vigorously having endured 100 impacts at 100 kmh and still standing.
The TMP car park sign ‘No Entry’ is ideal for directing traffic into the correct path of flow, making it clear not to enter certain areas. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
The tactile Blister paving is essential to the safety of visually impaired people navigating our busy streets. This profile underfoot gives warning to the change of a footpath that meets a road, where there are no kerbs to differentiate the two. Comprising of rows of flat-topped 5mm high blisters. Also available as Corduroy.
The Buff coloured variant is used for where there are controlled crossing points, such as zebra, pelican and puffin crossings. The red variant is put in place where there are uncontrolled crossing points such as side road crossings, kerb to kerb flat road humps and busy cross overs
Pack of 10 tiles per box
Note: The exact colour/tone may vary batch to batch.
The TMP car park sign ‘Chevron Right’ is ideal for directing traffic flow, and warning of tight corners. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
The TMP short tubular hazard marker is terrific for use on UK highways due to its self-righting design and reflective coatings white on the front and red on the reverse. Â Making this marker highly visible day and night and perfect for highlighting hazards next to fast moving traffic.
The TMP Munro Steel-Core bollard has been designed and tested to protect pedestrians and assets.
Use our Bollard Builder below to customise your bollard.
The tactile Blister paving is essential to the safety of visually impaired people navigating our busy streets. This profile underfoot gives warning to the change of a footpath that meets a road, where there are no kerbs to differentiate the two. Comprising of rows of flat-topped 5mm high blisters. Also available as Corduroy.
The Buff coloured variant is used for where there are controlled crossing points, such as zebra, pelican and puffin crossings. The red variant is put in place where there are uncontrolled crossing points such as side road crossings, kerb to kerb flat road humps and busy cross overs.
Pack of 10 tiles per box
Note: The exact colour/tone may vary batch to batch.
The Tactile Corduroy paving is very important to pedestrians negotiating our footpaths. The profile differs from the Blister profile to convey a different message: ‘hazard, proceed with caution’.
The Corduroy highlights the presence of specific hazards such as steps, level crossings or the approach to on-street rapid transit platforms (LRT). Comprising of rows of 6mm high rounded bars running transversely across the direction of the pedestrians travel.
Pack of 10 tiles per box
Note: The exact colour/tone may vary batch to batch.
The tactile Blister paving is essential to the safety of visually impaired people navigating our busy streets. This profile underfoot gives warning to the change of a footpath that meets a road, where there are no kerbs to differentiate the two. Comprising of rows of flat-topped 5mm high blisters. Also available as Corduroy.
The Buff coloured variant is used for where there are controlled crossing points, such as zebra, pelican and puffin crossings. The red variant is put in place where there are uncontrolled crossing points such as side road crossings, kerb to kerb flat road humps and busy cross overs.
Pack of 10 tiles per box
Note: The exact colour/tone may vary batch to batch.
The Manchester Bio bollard is made from a bio-polymer derived from sugar cane. Part of our versatile range of street furniture, this bollard is designed for town or city centres, public spaces, along footpaths, or anywhere else you need to restrict vehicle access.
The Evo-SightScreen is a reboundable visibility screen designed to reduce the speed of vehicles on the approach to roundabouts. Completely modular, the Evo-SightScreen is built using the same components as the award-winning Evo-Chev and can be made to any length.
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
Patent Pending
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
Patent Pending
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
Patent Pending
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
Patent Pending
No account yet?
Create an Account