Material
Recyclable
The Wrench for the TMP City post has been specially designed to fit perfectly around the City post bottom groves. The wrench enables the Post to be tightened when installing into Anchor Cup and loosened when removal is necessary.
The Alpha Solar sign light is ideal for installation where there is no power available. A discreet lightweight solar panel attached to the sign light produces plenty of power to run the sign light all year round. The system comprises of: the aluminium Alpha LED sign light, solar panel, charge controller, battery pack and all the necessary cables. You just need to provide your own column, sign and sign clips.
This TMP City Post traffic separator, is perfect for areas with high volumes of traffic, rebounding back to an upright position.  It has been tested vigorously having endured 100 impacts at 100 kmh and still standing.
The Orion 20 is an elegant and robust polymer bollard with a 20mm tall reflective band at the top and optional 20mm reflective band at the base. Truly versatile, the Orion 20 bollard comes in standard or passively safe rebound material and installs with a socket, steel-core or concrete.
The TMP Pictor Minor Steel-Core bollard has been designed and tested to protect pedestrians and assets. The Pictor Minor bollard features a smaller sign face, ideal for use on shared cycle/ pedestrian routes.
Use our Bollard Builder below to customise your bollard.
This is a 500mm wide x 50mm high speed bump section in black. These bumps are ideal for calming traffic especially around vulnerable road users such as near schools.
The award-winning NonCrete bio-polymer bollard is the perfect replacement for traditional concrete bollards. It’s easier to install and maintain, and better for the environment.
We also offer alternative reflective banding colours.
The Dual Apollo Alpha Solar sign light will automatically illuminate two traffic signs without the need for external power. The system comprises of: 2 x aluminium Alpha LED sign lights, solar panel, charge controller, battery pack and all the necessary cables. You just need to provide your own column, signs and sign clips.
The TMP Locksafe socket plug plate has been made to perfectly fit into the Locksafe socket to seal the hole when there isn’t a bollard inserted into it. This plug is important to keep the socket clean and stop anyone tripping in the hole when it is empty.
The TMP Manchester Steel-Core bollard has been designed and tested to protect pedestrians and assets.
Use our Bollard Builder below to customise your bollard.
The Pegasus bollard is the ultimate sign carrying bollard for rectangular sign faces. With 305mm x 255mm signage capacity either side, the Pegasus is perfect for displaying disabled badge holder signs (661A) or enforcing other parking restrictions.
Use our Bollard Builder below to customise your bollard.
The speed bump end caps come in pairs and are fixed to the ends of the speed bump sections to leave a smooth finish to the speedbump.
These speed bumps are ideal for placing near areas that drivers need to reduce speed and take care.
The modern looking Munro bollard has been designed to be robust and elegant. The Munro is ideal for marking junctions and for reinforcing traffic calming schemes.
Our bollards can also be retrofitted to replace traditional base lit bollards, by using the Universal Conversion Plate, which allows easy installation without the need to excavate or remove the existing light box. The plates are manufactured from stainless steel and powder coated in matt black.
The Tactile Corduroy paving is very important to pedestrians negotiating our footpaths. The profile differs from the Blister profile to convey a different message: ‘hazard, proceed with caution’.
The Corduroy highlights the presence of specific hazards such as steps, level crossings or the approach to on-street rapid transit platforms (LRT). Comprising of rows of 6mm high rounded bars running transversely across the direction of the pedestrians travel.
Pack of 10 tiles per box
Note: The exact colour/tone may vary batch to batch.
The Churchill bollard is a plastic blow moulded verge maker. Easy to install and hard wearing, the Churchill post has a cylindrical design with hi vis reflective area conforming to RI EN12899-1 class R2 reflectors.
Delivering industry-leading power efficiency, the EcoLight will illuminate traffic signs up to 1200mm and help you reduce carbon emissions on your network.
Sign column/post, sign or jubilee clips not included.
This is a 500mm wide x 50mm high speed bump section in yellow. These bumps are ideal for calming traffic especially around vulnerable road users such as near schools.
This TMP Verge Marker, is perfect for highlighting roadside verges and rebounding back to an upright position if hit.  It has been tested vigorously having endured 100 impacts at 100 kmh and still standing.
The TMP car park sign ‘No Entry’ is ideal for directing traffic into the correct path of flow, making it clear not to enter certain areas. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
The tactile Blister paving is essential to the safety of visually impaired people navigating our busy streets. This profile underfoot gives warning to the change of a footpath that meets a road, where there are no kerbs to differentiate the two. Comprising of rows of flat-topped 5mm high blisters. Also available as Corduroy.
The Buff coloured variant is used for where there are controlled crossing points, such as zebra, pelican and puffin crossings. The red variant is put in place where there are uncontrolled crossing points such as side road crossings, kerb to kerb flat road humps and busy cross overs
Pack of 10 tiles per box
Note: The exact colour/tone may vary batch to batch.
The TMP car park sign ‘Chevron Right’ is ideal for directing traffic flow, and warning of tight corners. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
The TMP short tubular hazard marker is terrific for use on UK highways due to its self-righting design and reflective coatings white on the front and red on the reverse. Â Making this marker highly visible day and night and perfect for highlighting hazards next to fast moving traffic.
The TMP Munro Steel-Core bollard has been designed and tested to protect pedestrians and assets.
Use our Bollard Builder below to customise your bollard.
The tactile Blister paving is essential to the safety of visually impaired people navigating our busy streets. This profile underfoot gives warning to the change of a footpath that meets a road, where there are no kerbs to differentiate the two. Comprising of rows of flat-topped 5mm high blisters. Also available as Corduroy.
The Buff coloured variant is used for where there are controlled crossing points, such as zebra, pelican and puffin crossings. The red variant is put in place where there are uncontrolled crossing points such as side road crossings, kerb to kerb flat road humps and busy cross overs.
Pack of 10 tiles per box
Note: The exact colour/tone may vary batch to batch.
The Tactile Corduroy paving is very important to pedestrians negotiating our footpaths. The profile differs from the Blister profile to convey a different message: ‘hazard, proceed with caution’.
The Corduroy highlights the presence of specific hazards such as steps, level crossings or the approach to on-street rapid transit platforms (LRT). Comprising of rows of 6mm high rounded bars running transversely across the direction of the pedestrians travel.
Pack of 10 tiles per box
Note: The exact colour/tone may vary batch to batch.
The tactile Blister paving is essential to the safety of visually impaired people navigating our busy streets. This profile underfoot gives warning to the change of a footpath that meets a road, where there are no kerbs to differentiate the two. Comprising of rows of flat-topped 5mm high blisters. Also available as Corduroy.
The Buff coloured variant is used for where there are controlled crossing points, such as zebra, pelican and puffin crossings. The red variant is put in place where there are uncontrolled crossing points such as side road crossings, kerb to kerb flat road humps and busy cross overs.
Pack of 10 tiles per box
Note: The exact colour/tone may vary batch to batch.
The Manchester Bio bollard is made from a bio-polymer derived from sugar cane. Part of our versatile range of street furniture, this bollard is designed for town or city centres, public spaces, along footpaths, or anywhere else you need to restrict vehicle access.
The Evo-SightScreen is a reboundable visibility screen designed to reduce the speed of vehicles on the approach to roundabouts. Completely modular, the Evo-SightScreen is built using the same components as the award-winning Evo-Chev and can be made to any length.
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
Patent Pending
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
Patent Pending
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
Patent Pending
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
Patent Pending
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
Patent Pending
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
Patent Pending
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
Patent Pending
No account yet?
Create an Account